Fermentation

Home Brewing Beer

The short version

Beer is grain sugar fermented by yeast. Start with an extract kit, sanitize everything that touches the cooled wort, keep the fermenter at the yeast's temperature, and bottle with a measured dose of priming sugar.

Intermediate 6 min read ✓ Reviewed November 2026

Home Brewing Beer
Photo: PierreSelim, CC BY 3.0 · Wikimedia Commons

Beer is four things: malted grain, water, hops and yeast. You turn the grain’s starch into sugar, boil that sweet liquid (the wort, said “wurt”) with hops, cool it, and let yeast eat the sugar and make alcohol and bubbles. Your first batch takes about an afternoon of work and a month of waiting.

For adults

Home brewing is for adults of legal drinking age. In the US, federal law lets each adult household make up to 100 gallons a year for personal use (200 with two or more adults), and it can’t be sold. Some states and towns add their own rules, so check yours. Drink what you make in moderation, and never drive after.

Extract or all-grain?

Extract Partial mash All-grain
Where the sugar comes from Malt extract (syrup or powder) someone else mashed and concentrated Extract plus a small bag of steeped or mashed grain You mash all the grain yourself
Brew day 2–3 hours 3–4 hours 5–6 hours
Extra gear A big stockpot A grain bag Mash tun or a brew-in-a-bag kettle, thermometer, more space
Control over flavor Good Better Total
Cost per batch Higher Medium Lowest
Best for Your first few batches Moving up Once you’re hooked

Start with extract. It skips the trickiest step, so you can learn sanitation and fermentation, which matter more. A 1-gallon or 5-gallon kit from a home-brew shop includes everything.

Gear for a first batch (5 gallons / 19 L)

  • Brew kettle: at least 5 gallons for a partial boil, stainless steel.
  • Fermenter (food-grade bucket or glass/plastic carboy) with a lid, rubber stopper and airlock.
  • No-rinse sanitizer (Star San–type acid sanitizer or an iodophor). This is the one thing you can’t skip.
  • Thermometer and a hydrometer (measures sugar, so you know when it’s done and its strength).
  • Bottling bucket with spigot, tubing, bottle filler, about 50 brown 12-oz bottles, caps and a capper.

How it works: from grain to glass

1. Mashing (all-grain): starch to sugar

Malted barley carries its own enzymes. Soak the crushed grain in hot water, about 148–158°F (64–70°C) for an hour, and those enzymes snip the starch into sugars yeast can eat.

  • Lower in that range (148–152°F) makes more simple sugar: a drier, crisper, stronger beer.
  • Higher (154–158°F) leaves more unfermentable sugar: a fuller, sweeter body.
  • Water ratio matters. About 1.25–1.5 quarts of water per pound of grain (2.6–3.1 L/kg) keeps the mash thick enough for the enzymes to work and easy to hold at temperature. Too thin and the temperature drifts; too thick and it’s stiff and hard to rinse.

Then you drain the sweet liquid and rinse the grain with hot water (sparging) to collect the rest.

With extract, the maltster already did this. You just dissolve the extract in hot water.

2. The boil and the hops

Boil the wort for 60 minutes. The boil sterilizes it, drives off unwanted aromas, and pulls flavor from the hops:

Hops added Boil time left What you get
Bittering 60 minutes Bitterness, little aroma
Flavor 15–20 minutes Some bitterness, some hop flavor
Aroma 0–5 minutes, or after the boil Flowery, citrusy, piney smell; little bitterness

Long boiling turns the hop resins bitter but boils away their perfume, so aroma hops go in last.

3. Cooling fast

Get the wort from boiling down to the yeast’s temperature, usually 65–70°F (18–21°C) for ales, as fast as you can: a sink of ice water, or a copper coil chiller. Warm, sweet, cooling wort is a perfect home for wild bacteria, and fast cooling also makes clearer beer. From here on, everything that touches the wort must be sanitized.

4. Pitching the yeast

Pour or siphon the cooled wort into the sanitized fermenter, top it up with cold water to 5 gallons if you did a partial boil, and splash it around to add air (yeast needs oxygen to get started). Take a hydrometer reading. Then pitch (add) the yeast, seal with the airlock and set it somewhere dark and steady.

Ale yeast works at 60–72°F (16–22°C) and is the place to start. Lager yeast needs 48–58°F (9–14°C) and more patience.

5. Fermenting: what to look for

  • 12–48 hours: bubbles start in the airlock and a thick foam (krausen) forms on top. That’s the yeast working.
  • Days 2–5: vigorous bubbling; the fermenter may feel warm. Fermentation makes its own heat, so a cool spot helps.
  • Days 5–14: bubbling slows, the foam falls, the yeast settles into a layer at the bottom.
  • Done is when the hydrometer reads the same two or three days in a row, usually after 2 weeks. Bubbles stopping isn’t proof.

Why temperature matters so much

Yeast makes more than alcohol. Too warm, and it throws off fruity and solventy flavors and harsh, headachey “hot” alcohols. Keep an ale at the low end of its range for the cleanest beer.

6. Bottling and priming

The beer is flat when fermentation finishes. To carbonate it in the bottle, you add a small, measured amount of sugar so the remaining yeast makes a little more CO₂ inside the sealed bottle.

  1. Sanitize bottles, caps, bucket, tubing and filler.
  2. Boil about ¾ cup (130–140 g) corn sugar (dextrose) in 2 cups water for 5 gallons; cool it and pour it into the bottling bucket.
  3. Siphon the beer onto it, leaving the yeast layer behind. Stir gently, don’t splash.
  4. Fill bottles to about an inch from the top, cap them.
  5. Keep at room temperature 2 weeks, then chill a test bottle.

Safety: bottle bombs

Too much priming sugar, or bottling before fermentation is truly finished, can over-pressure bottles until they burst. Measure the priming sugar by weight, confirm a steady hydrometer reading first, and use real beer bottles, not thin screw-top ones. Store new bottles in a closed box.

Sanitation is the whole game

Most bad home brew is an infection: sour, medicinal, buttery or vinegary flavors from stray bacteria and wild yeast.

  • Clean, then sanitize. Cleaning removes dirt; sanitizer kills what’s left. Sanitizer doesn’t work through grime.
  • Before the boil, cleaning is enough. After the boil, everything is sanitized: spoons, thermometer, fermenter, airlock, your hands.
  • Avoid scratches in plastic fermenters; bacteria hide in them. Use soft sponges.
  • Don’t fear the foam. No-rinse acid sanitizers leave foam behind that’s fine to brew onto.

A simple first-batch plan

Day What you do
Day 1 (brew day, ~3 hours) Steep the kit’s grain, dissolve the extract, boil 60 minutes with hops on schedule, cool fast, pitch ale yeast at 65–68°F
Days 2–14 Leave it alone at 64–68°F (18–20°C). Watch the airlock, don’t open the lid
Day 14 Hydrometer reading; again on day 16. Same reading? Bottle with priming sugar
Days 16–30 Bottles condition at room temperature
Day 30 Chill a bottle overnight, pour gently, leave the last half-inch of yeast in the bottle

Start with an amber ale, pale ale or brown ale kit. They hide small mistakes better than a pale lager or a delicate wheat beer.

Kosher note

Plain beer made from barley, hops, water and yeast is generally considered kosher, and home brew from plain ingredients raises few questions; flavorings, fruit concentrates and some fining agents can. Many kits and extracts carry a hechsher. Beer is chametz, so it’s out on Passover along with the grain, extract and yeast; see The Passover Kitchen. Ask your rabbi about specifics.

Common mistakes

Problem Why Fix
Sour, vinegary or medicinal beer Infection Sanitize everything after the boil; replace scratched plastic
Fruity, solventy, hot-tasting Fermented too warm Find a cooler spot, or a tub of water to steady the temperature
No bubbles after 2 days Dead yeast or a leaky lid (the gas escapes elsewhere) Check the hydrometer; if it hasn’t dropped, pitch fresh yeast
Flat bottles Too little priming sugar, too cold, too soon Store warmer and wait another week
Gushers or burst bottles Bottled too early or over-primed Wait for a stable gravity; weigh the sugar
Cloudy beer Slow cooling, or poured the yeast Chill fast; pour gently

Sources